The MP15 was the last in a line of EMD end-cab switchers that stretched back to the prewar SW1. By the time the MP15 debuted in 1974, the multipurpose road switcher, descended from the Alco RS-series and the EMD GP7, had become the universal locomotive. The cab unit was already a dinosaur and the single-purpose yard engine was rapidly headed for extinction. To create a more versatile switcher, EMD gave the MP15 a longer frame than its predecessor, the SW1500, in order to fit it with the same Blomberg trucks as a road engine. Those better-riding trucks, along with more weight, a larger fuel capacity, and bigger sandboxes, made the MP15 suitable for road duty as well as switching, and allowed EMD to sell more than 500 units before the last MP15 was delivered in 1987.
The MP15 came in two flavors, traditional and modern. The MP15DC used traditional electrical gear and shared the front-mounted radiator and air intakes that had characterized all previous EMD end-cab switchers. It was basically a beefed-up SW1500. The MP15AC, however, incorporated EMD's Dash 2 technology, with solid-state transistors and circuit boards replacing the wiring, switches, and relays found in earlier diesels. Its cooling system was borrowed from the "Tunnel Motors" EMD had created for the Southern Pacific.
The front of the hood was plain, like the rear of a Tunnel Motor, and the radiator air intakes were moved to the sides of the hood, low and at the front of the engine. Not surprisingly, the Southern Pacific was the first customer to order an MP15AC. Because the Dash 2 technology was relatively new and some railroads found it unnecessarily expensive for a lowly switcher, EMD continued to make both the DC and AC versions of the MP15 for most of its production run, and sales for the two models were about equal.
M.T.H. returns our full-scale version of the last and largest of the end-cab switchers to the RailKing Scale line for 2017. Our model replicates the more-traditional MP15DC with its front-mounted radiator and air intakes. Like its prototype, this RailKing Scale engine is equally at home doing slow-speed yard duty or hauling commuters or freight along your main line.
- Intricately Detailed, Durable ABS Body
- Die-Cast Truck Sides, Pilots and Fuel Tank
- Metal Chassis
- Metal Handrails and Horn
- (2) Handpainted Engineer Cab Figures
- Authentic Paint Scheme
- Metal Wheels, Axles and Gears
- (2) Remote-Controlled Proto-Couplers
- Prototypical Rule 17 Lighting
- Directionally Controlled Constant Voltage LED Headlight
- (2) Precision Flywheel-Equipped Motors
- Onboard DCC/DCS Decoder
- Locomotive Speed Control In Scale MPH Increments
- 1:48 Scale Proportions
- Proto-Sound 3.0 With The Digital Command System Featuring Freight Yard Proto-Effects
- Unit Measures: 13” x 2 1/4” x 4 1/4”
- Operates On O-31 Curves Diesel DCC Features
- F0 Head/Tail light
- F1 Bell
- F2 Horn
- F3 Start-up/Shut-down
- F4 PFA
- F5 Lights (except head/tail)
- F6 Master Volume
- F7 Front Coupler
- F8 Rear Coupler
- F9 Forward Signal
- F10 Reverse Signal
- F11 Grade Crossing
- F12 Clickety Clack (On/Off)
- F13 Idle Sequence 4
- F14 Idle Sequence 3
- F15 Idle Sequence 2
- F16 Idle Sequence 1
- F17 Extended Start-up
- F18 Extended Shut-down
- F19 Rev Up
- F20 Rev Down
- F21 One Shot Doppler
- F22 Coupler Slack
- F23 Coupler Close
- F24 Single Horn Blast
- F25 Engine Sounds
- F26 Brake Sounds
- F27 Cab Chatter
- F28 Feature Reset
MTH #20-92241 U.S. Army 4-Car 60' Flat Car Set w/(2) Bradley Fighting VehiclesSpecial Price $329.99 Regular Price $359.99
